Мехатронички системи, Напредни системи за потпирање кај возилата
1. Gavriloski, V., Mickoski, H., Korunovski, D., Analysis of control strategies in design of mechatronic active suspension system. Proc. Faculty of Mechanical engineering – Skopje, Vol.23, No.2, pp. 81-87, (2004).
2. Gavriloski, V., Kolev, E., Danev, D., Improvement of vehicle vertical dynamic by using an optimal active control. Proc. IV International Congress on Mechanical engineering technologies'04, Varna, Bulgaria, 2004.
3. Gavriloski, V., Improvement of vehicle dynamic behavior by semi active suspension and air springs, with integrated mechatronic approach. Doctoral thesis, Faculty of mechanical engineering, Skopje, November 2005.
4. Gavriloski, V., Mickoski, I., Improvement of vehicle vertical dynamic by using semi active control. Proc. XII International science conference for transport engineering MOTAUTO'05, Veliko Tarnovo, Bulgaria, November 2005.
Мерење, анализа и симулација на динамичката напонско деформациона состојба на конструкциите
1. Gavriloski, V., Radevski, G., Use of chain structures as bearing elements for large span., Proc. VI International symposium for theoretical and applied mechanic, Struga, R.Macedonia, 1998.
2. Gavriloski, V., Loads and stress-strain condition for bucket wheel excavators bearing structure. Master thesis, Faculty of mechanical engineering, Skopje, 1999.
3. Ilievski, A., Angusev, K., Petreski, Z., Gavriloski, V., Expertise for determining the working capability of the bucket wheel excavator SRs 1300 after the brake down in Mine "SUVODOL"-Bitola in November 1999, Faculty of mechanical engineering, Skopje, March, 2000.
4. Gavriloski, V., Jakimovski, S., A Methodology for defining loads acting on bucket wheel excavator construction. Proc. Faculty of Mechanical engineering – Skopje, Vol.19, No.1, pp. 19-26, (2000).
5. Gavriloski, V.,Ilievski, A., Angusev, K., Petreski, Z., Stress-strain condition simulation of bucket wheel excavator bearing structures. Proc. VII International symposium for theoretical and applied mechanic, Struga, R.Macedonia, 2000.
6. Gavriloski, V., Ilievski, A., Jakimovski, S., Loads and stress condition of bucket wheel excavators carrying structures. Proc. XVII International Conference on "Material flow, machines and devices in industry", Belgrade, September 2002.
7. Gavriloski, M., Gavriloski, V., Safety life of the bucket wheel excavators carrying structures. Proc. XVII International Conference on "Material flow, machines and devices in industry", Belgrade, Serbia, September 2002.
8. Gavriloski, V., Jakimovski, S., Gavriloski, M., Methodology for stress condition identification of the bucket wheel excavators bearing construction. Proc. VIII Symposium on theoretical and applied mechanics, Skopje, R.Macedonia, 2002.
9. Gavriloski, V., Jakimovski, S., Gavriloski, M., Influence of fatigue on safety life exploitation of the excavators. Proc. VIII Symposium on theoretical and applied mechanics, Skopje, R.Macedonia, 2002.
10. Gavriloski, V., Gavriloski, M., Identification of the stress condition of bucket wheel excavators' carrying construction. Proc. IV International Congress on Mechanical engineering technologies'04, Varna, Bulgaria, 2004.
Метод на конечни елементи
1. Gavriloski, V., Dimitrioska, M., Finite Element Analysis of Bus N615SGR Construction for Motor Coach Industry-Skopje, Technical report, Faculty of mechanical engineering, Skopje, March,2000.
2. Kostovska, D., Danev, D., Kosevski, M., Gavriloski, V., Analyses of drum break using the finite element method. Proc. Faculty of Mechanical engineering – Skopje, Vol.19, No.1, pp. 33-38, (2000).
3. Gavriloski, V., Azievska, L., Theoretical and experimental analysis of space frame collapse. Proc. Faculty of Mechanical engineering – Skopje, Vol.19, No.1, pp. 37-32 (2000).
4. Azievska, L. Gavriloski, V., Dimitrioska, M., Application of simulations in research for development of safety bus structures. Proc. VII International symposium for theoretical and applied mechanic, Struga, R.Macedonia, 2000.
5. Gavriloski, G., Danev, D., Kosevski, M., Gavriloski, M., Gavriloski, V., Verification of strength of superstructure by calculation according to ECE R66 (Annex6) for bus 'N615 MPNschool-Volvo"; Technical report, Faculty of mechanical engineering, Skopje, July 2001.
6. Gavriloski, V., Gavriloski, M., Verification of the strength of superstructure by calculation according to ECE R66 (Annex6). Proc. IX International Scientific-Technical Conference on Internal Combustion Engines, Automobile Techniques and Transport; Russe, Bulgaria, October 2002.
Мерење и анализа на вибрации и бучава
1. Ivanovski, H., Petreski, Z., Gavriloski, V., Measurement values, measurement points and vibration norms for rotating machines and equipment, Proc. II International symposium for vibration diagnostic of machinery and equipment in power plants, Bitola, R.Macedonia, 1997.
2. Ilievski, A., Gavriloski, V., Kralevski, N., Some aspects of four bearing machine alignment, Proc. II International symposium for vibration diagnostic of machinery and equipment in power plants, Bitola, R.Macedonia, 1997.
3. Ilievski, A., Gavriloski, V., Diagnostic and evaluation of rolling bearing condition according to vibration measurements, Proc. VI International symposium for theoretical and applied mechanic, Struga, R.Macedonia, 1998.
4. Petreski, Z., Ilievski, A., Gavriloski, V., Some aspects of the natural frequencies changes related to structural discontinuity, Proc. X World Congress of Theory of Machines and Mechanisms, Oulu, Finland, 1999.
5. Ilievski, A., Angusev, K., Petreski, Z., Gavriloski, V., Some aspects and an approach in evaluation of blades dynamic condition for stem powered machines. Proc. VII International symposium for theoretical and applied mechanic, Struga, R.Macedonia, 2000.
6. Ilievski, A., Korunovski, D., Angjushev, K., Petreski, Z., Gavriloski, V., Measurement and evaluating of dynamic condition of rotating machinery in hydro power plants ESM "Globochica". Technical reports, Faculty of Mechanical engineering – Skopje, 1997 and 1998.
7. Ilievski, A., Korunovski, D., Petreski, Z., Gavriloski, V., Evaluating of dynamic condition and balancing of rotating machinery in Power producing company ESM " Energetika". Technical reports, Faculty of Mechanical engineering – Skopje, 2001.
8. Ilievski, A., Korunovski, D., Angjushev, K., Petreski, Z., Gavriloski, V., Measurements and evaluation of vibration level for rotating machinery in steel plant AD"Makstil"- Skopje. Technical reports, Faculty of Mechanical engineering – Skopje, 2001 and 2002.
9. Ilievski, A., Korunovski, D., Angjushev, K., Petreski, Z., Gavriloski, V., Measurements and evaluation of vibration level for steam turbo machines in Power producing company ESM " Oslomej", "Bitola" and "Negotino". Technical reports, Faculty of Mechanical engineering – Skopje, 1997, 1998, 2000, 2001, 2003, 2004 and 2005.
10. Ilievski, A., Angjushev, K., Petreski, Z., Gavriloski, V., Measurements and analysis of blades' natural frequencies in steam turbo machines for Power producing company ESM " Oslomej", "Bitola" and "Negotino". Technical reports, Faculty of Mechanical engineering – Skopje, 1997, 1998, 2000, 2001, 2003, 2004 and 2005.
.JPG)
