REFERENCES
(Projects)
1. Applied Air Quality Modelling and Mitigation Validation for the City of Skopje, University coordinator, UNDP grant no. 07/10-25/9550, 2025-2026
2. Technical design and documentation for improvement of the operation of the WWTP at Dojran Steel facility, Dojran, 2023-2025
3. Country review outline for MKD (World Small Hydropower Development Report for UNIDO and International Center on Small Hydro Power), 2025
4. Review of the Basic Design for Wind park up-to 396 MW of power for the municipalities of Shtip, Radovish and Karbinci, Faculty of Mechanical Engineering – Skopje, 2025
5. Consultancy services for Ministry for transport, 2025-2027
6. Young Energy Europe, Energy Scouts, German Chambers of Commerce Abroad, Supervisor, https://young-energy-europe.eu/en/energy-scouts/, 2024-2026
7. Establishing "Greening Business" Facility, Republic of North Macedonia, Ref. NEAR/SKP/2023/EA-RP/0045, Senior Short-Term Expert – Capacity building expert, (Europartner Consulting for IBF International Consulting-Belgium), 2025
8. Study for diagnostic of the condition of the existing steel pipeline Rashche 1 and 2 (for the Skopje Water Supply Company), CIRKO, 2024
9. Western Balkans Manufacturing Value Chain: Supplier Development Program (AAG-Analysis and Advisory group for IFC), 2024
10. Bridging the gender and age gap on the Labor market through Capacity building and promoting new jobs in the cross-border regions (mechanical engineering) – Project for cross-border collaboration no. 48‐00‐00164/2021‐28‐9, 2024
11. Final design of Skopje Wastewater Treatment Plant, (Urban Water Engineering –Skopje and Wassertechnik GmbH, Essen, Germany), Responsible Designer for Mechanical Part, 2024-2025
12. Feasibility study for determining the energy possibilities of the RWS Studencica, CIRKO, 2023
13. Feasibility study for electricity production possibilities for JKP Tetovo water supply system, CIRKO, 2023
14. Consultancy services for Macedonian Power Plants (ELEM/ESM), 2013-2026
15. COST Action CA21104: PAN-EUROPEAN NETWORK FOR SUSTAINABLE HYDROPOWER (PEN@Hydropower), Member of the Committee, https://www.cost.eu/actions/CA21104; 2022-2026
16. Numerical and Experimental Investigations of the Aerodynamic Characteristics of a Model Race Car, Ss. Cyril and Methodius University Research Funded Project, 2022
17. Inno Fab Lab, Inno Tech Club (Challenge for establishing fabrication laboratories FAB LABS – Young people create, FITD), 2022-23
18. Review of the Basic design for refurbishment of oxidation and disinfection systems at Strumica water filtration station, 2021
19. Laboratory testing and optimization of Waste Water Treatment Plant at Titan Cementarnica USJE, 2021
20. Construction project and Consultancy Services for Installing of Hydromechanical Equipment at Rechani Dam (for Sileks Nemetali), 2021-22
21. Smart LightwAve Multi-modal Distributed Acoustic Strain and Temperature sensor (SLAM-DAST) – Horizon 2020 Grant agreement ID: 971149, 2021-23
22. Consultancy services in the areas of natural gas, heat energy, water services and energy legislative (for Regulatory Commission for Energy and Water Services), 2020-22
23. Training in turbine regulation (for Electric Power Company – ESM, HES Mavrovo), 2020-21
24. Feasibility Study for SHPPs at the river intakes of Shara Water Catchment System (for Electric Power Company – ESM), 2020
25. Design of a flow measuring system at the Pumping station Dovledjik (for PC Strezevo and Bitola Public Water Supply System), 2020
26. Pre-feasibility Study for refurbishment of the mechanical and electrical equipment for 5 (five) small hydropower plants and remote control and monitoring of their operation (for PC Strezevo-Bitola), 2019-2020
27. Inno Tech Club, U.S. Department of State Alumni Engagement Innovation Fund, 2019, https://alumni.state.gov/aeif/aeif-2019-winners
28. Basic Design for collection, transport, treatment and release of technology, sanitary and atmospheric water from Bitola TPP, Designer for Mechanical Part, 2019-2020
29. Cross-border Cooperation between N. Macedonia and Greece in the Water Management Field, Konrad-Adenauer-Stiftung, Skopje Office, (Joint project with the Aristotle University in Thessaloniki), 2019
30. Preliminary design for Industrial Waste Water Treatment Plant for Filtering Station Topolovic, (Head designer for Mechanical Part), Skopje, 2019
31. Increasing the value of Hydropower through increased Flexibility (Hydroflex), Horizon 2020 EU Funded Project (University coordinator), 2018-2022
32. New opportunities for energy and nutrient recycling in water supply and sewage management, for Häme University of Applied Sciences (coordinator), 2017-2018
33. Building Knowledge and Experience Exchange in CFD, CEEPUS Network CIII-RS-1012-03-1718 (University Coordinator), 2017-2018.
34. Pre-Feasibility Study for Vardar Valley in Macedonia, Consortium with AF-Consult Switzerland and AF-Skopje, for ELEM, 2016-2018
35. Straightening Cross-border Cooperation between Macedonia and Greece – Developing a Joint Expertise in Coping with Common Environmental Challenges, KAS, Skopje Office, 2017
36. Revision of the Project Oslomej: Analysis of the possibilities for supply of TPP Oslomej with natural gas, MFS, Prepared for ELEM, Skopje, 2016
37. HERD-Quality Improvement of Master Studies in Energy and Environment (QIMSEE) funded by the Norwegian Ministry of Foreign Affairs, 2014-2016
38. Review of the Basic Design documentation for SHPP Gabrovska reka, no. 103 and 104, (for EMK Mali Hidroelektrani-Skopje), 2015
39. Review of the Basic Design documentation for SHPP Dupnica, no. 30, (for EMK Mali Hidroelektrani-Skopje), 2015
40. Review of the Basic Design documentation for SHPP Recanska, no. 29, (for EMK Mali Hidroelektrani-Skopje), 2015
41. Preliminary design for construction of SHPP Kovachka 1, 2 and 3 (for Kleinwasserkraftwerke Gmbh & Co KG), 2014
42. Review of the Basic Design documentation for Irrigation Programme “Southern Vardar Valley”, Phase II: Irrigation Scheme Valandovo (mechanical part), (for the Ministry of Agriculture, Forestry and Water Economy-Skopje), 2014.
43. Review of the Basic Design documentation for Irrigation Programme “Southern Vardar Valley”, Phase II: Irrigation Scheme Negorci-Prdejci (mechanical part), (for the Ministry of Agriculture, Forestry and Water Economy-Skopje), 2013.
44. Review of the Basic Design documentation for Irrigation Programme “Southern Vardar Valley”, Phase II: Irrigation Scheme Gevgelija (mechanical part), (for the Ministry of Agriculture, Forestry and Water Economy-Skopje), 2013.
45. Review of the Basic Design documentation for SHPP Toranica, no. 179-3, (for EMK Mali Hidroelektrani-Skopje), 2013.
46. Review of the Basic Design documentation for SHPP Kriva reka, no. 179-2, (for EMK Mali Hidroelektrani-Skopje), 2013.
47. Review of the Basic Design documentation for SHPP Kriva reka, no. 179-1, (for EMK Mali Hidroelektrani-Skopje), 2013.
48. Review of the Basic Design documentation for Waste water treatment plant for the Aluminum and zinc pressure casting factory for automotive parts (Industrial Area 1-Skopje), 2012.
49. Capacity Building of the Secondary Education Teachers in the Field of Environmental and Social Impact of Renewable Energy, UNESCO Project, 2012.
50. Development of Environmental and Resources Engineering Learning (DEREL), EU TEMPUS co-financed Project, 2010-2013.
51. Application of CFD and CAX technology in the fluid flow processes in the power production and environmental engineering, Research project funded by the Ministry of Education and Science of R. Macedonia, 2006-2009.
52. Bidding and Contract documentation for concession of HPP Boskov Most, Faculty of Mechanical Engineering-Skopje, 2008.
53. Multiparameter Optimization In Design And Analysis Of Hydraulic Turbines, Bilateral Project financed by the Governments of the Republic of Slovenia and the Republic of Macedonia, 2007-2008.
54. Complex supervision of the documentation and equipment commissioning for HPP Sv. Petka (mechanical part), Faculty of Mechanical Engineering-Skopje, 2006-2013.
55. Monitoring and Improving the Rivers in the Vardar/Axios Watershed (MIRVAX), NATO Partnership for Peace co-financed project, SfP981877, 2006-2009.
56. Development of Environmental and Resources Engineering Curriculum (DEREC), EU TEMPUS co-financed Project CD_JEP-19028-2004, 2005-2008.
57. Numerical Simulation Programs in Mechanical Engineering (NSP-ME), EU TEMPUS co-financed Project CD_JEP-19014-2004, 2005-2009.
58. Study for Cost Analysis for Development of 24 small HPPs in R. Macedonia, prepared for the World Bank Group and NERA Economic Consulting, 2006.
59. Feasibility Study for 9 small HPPs in R. Macedonia (open call by the Ministry of Economy), prepared for Eastern Europe Energy Group, Austria, 2006.
60. Study for Construction of Four Small Hydropower Plants on the Studencica Water Supply System, Faculty Of Mechanical Engineering-Skopje, 2005.
61. Training in Sophisticated Scientific Research and Educational Techniques in Fluid Dynamics and Turbomachinery Investigation Using High Performance Computer (HPC) Environment, Tempus funded Project IMG-FYR3007-2004.
62. Hydrostatic Investigation of the Yield Pressure of PET bottle, Faculty of Mechanical Engineering-Skopje, 2004.
63. Feasibility Study for Water Supply of the Pelister Relay Station of the Macedonian Broadcasting, Faculty of Mechanical Engineering-Skopje, 2004.
64. Complex supervision of the documentation and equipment commissioning for HPP Kozjak (mechanical part), Faculty of Mechanical Engineering-Skopje, 2004.
65. Numerical and Experimental Investigation of the Flow in Axial and Radial Turbines, Bilateral Project no. 5389 funded by the Governments of the Republic of Slovenia and the Republic of Macedonia, 2004.
66. Modern Computational and Experimental Methods and Tools in Fluid Dynamics, Tempus funded Project IMG-FYR2006-2003.
67. Project report for the choice of the turbine type and characteristics for HPP Matka 2, 2003.
68. Study of small hydropower plants on the existing water supply systems in Eastern and Central Macedonia, Skopje, 2002.
69. Design project and Bidding documentation for small HPP Debar and small HPP Lukar, World Bank funded project TFO-23447, Faculty of Mechanical Engineering-Skopje, 2001.
70. Numerical Modeling and Investigation of the Cavitation in Turbomachinery, Research project funded by the Ministry of Education and Science of R. Macedonia, 1999.
71. Testing study for the condition of Unit 1 in HPP Spilje, Faculty of Mechanical Engineering-Skopje, 1999.
72. Testing study for the condition of Unit 4 in HPP Tikves, Faculty of Mechanical Engineering-Skopje, 1999.
73. Computer Control of the processes in Gas Pipeline Systems, Research project funded by the Ministry of Science of R. Macedonia, 1998.
74. Bidding documentation for HPP Lera, Faculty of Mechanical Engineering-Skopje, 1998.
75. Draft project for HPP Lera (mechanical part), Faculty of Mechanical Engineering-Skopje, 1998.
76. Complex supervision of the documentation and equipment commissioning for HPP Spilje (mechanical part), Faculty of Mechanical Engineering-Skopje, 1997.
77. Bidding documentation for HPP Kozjak (mechanical part), Faculty of Mechanical Engineering-Skopje, 1997.
78. Investment Study for Construction of small HPP Lukar 2, Faculty of Mechanical Engineering-Skopje, 1997.
79. Bidding documentation for small HPP Belica, Faculty of Mechanical Engineering-Skopje, 1997.
80. Design Project for HPP Dovledzik (mechanical part), Faculty of Mechanical Engineering-Skopje, 1997.
81. Design Project for HPP Filternica (mechanical part), Faculty of Mechanical Engineering-Skopje, 1997.
82. Non-destructive testing of Unit 1 in HPP Tikves, Faculty of Mechanical Engineering-Skopje, 1997.
83. Non-destructive testing of Unit 2 in HPP Spilje, Faculty of Mechanical Engineering-Skopje, 1997.